Skip to content
Harmonize IT

Generative AI

RAG vs fine-tuning for enterprise: how to choose

By Published Last updated 7 min read

In short

For most enterprise use cases built on internal documents, start with retrieval-augmented generation (RAG): it keeps answers current, cites its sources and respects access rights. Fine-tuning is the right tool when you need to change how a model behaves, not what it knows. This guide compares both and gives a decision table.

Enterprises that want a large language model (LLM) to work with their own knowledge face the same early question: should we use retrieval-augmented generation or fine-tune a model? The two techniques are often presented as alternatives. They solve different problems.

The short answer

  • Use RAG when the model needs to know things: your policies, contracts, product documentation, tickets or procedures.
  • Use fine-tuning when the model needs to behave differently: a fixed output format, a specific tone, a narrow classification or extraction task.
  • Use both only when an evaluation shows that RAG alone does not reach the quality you need.

In our projects, RAG is the starting point in the large majority of enterprise cases.

What RAG does

Retrieval-augmented generation leaves the model unchanged. When a user asks a question, the system first searches your documents for the most relevant passages, then sends those passages to the model together with the question. The model writes its answer from that material.

A RAG system has two halves:

  1. Indexing. Documents are collected, cleaned, split into chunks and indexed, usually as embeddings in a vector index alongside a keyword index.
  2. Answering. The question is used to retrieve the best chunks, which are re-ranked and inserted into the prompt. The model answers and cites the passages it used.

The knowledge lives in your index, not in the model. Update a document and the next answer reflects it.

What fine-tuning does

Fine-tuning continues the training of an existing model on your own examples, typically hundreds to thousands of input and output pairs. The result is a new version of the model whose weights have shifted towards your examples.

Fine-tuning is good at teaching patterns: “answer in this structure”, “classify these messages into our twelve categories”, “write in our brand voice”. It is poor at teaching facts reliably. A model does not memorise a document because it saw it during fine-tuning, and it cannot tell you which document an answer came from.

Side-by-side comparison

Criterion RAG Fine-tuning
Main purpose Give the model access to knowledge Change the model’s behaviour
Knowledge updates Immediate: re-index the document Requires a new training run
Source citations Yes, by design No
Access control per user Yes, filter at retrieval No, knowledge is baked into the model
Data needed Your existing documents Curated training examples
Upfront effort Ingestion and search pipeline Dataset preparation and training
Running cost Longer prompts, search infrastructure Hosting or premium rate for a custom model
Model portability High: swap the model, keep the index Low: tied to one base model
Main risk Poor retrieval gives poor answers Outdated or invented facts, costly iterations

Why RAG fits most enterprise needs

Enterprise knowledge changes. Prices, procedures and regulations move every month. With RAG, updating the assistant means updating a document.

Answers must be verifiable. In banking, insurance or the public sector, an answer without a source has little value. RAG can show the exact passages behind each statement, so a user can check before acting.

Not everyone may see everything. RAG can filter the search by the user’s permissions, so the model never receives a document the user is not allowed to open. A fine-tuned model has no notion of who is asking.

You keep your options open. Models improve and prices fall quickly. A RAG system with a clean abstraction can move from one provider to another, or to a self-hosted model, without rebuilding the knowledge base.

When fine-tuning is the better choice

Fine-tuning earns its place in specific situations:

  • A strict, repetitive output format that prompting does not hold reliably at scale.
  • A specialised task with many labelled examples, such as classifying claims, routing tickets or extracting fields from a known document type.
  • Tone and style that must be consistent across thousands of generated texts.
  • Cost and latency at high volume: a small fine-tuned model can replace a large general model on a narrow task.
  • Domain language that general models handle badly, for example dense internal jargon or a rare technical vocabulary.

In each case, you need quality training data and a way to measure the gain. Without an evaluation set, you cannot know whether the fine-tuned model is better than a well-written prompt.

A decision checklist

Answer these questions in order:

  1. Is the problem about missing knowledge? If the model would answer well with the right document in front of it, choose RAG.
  2. Does the knowledge change more than a few times a year? Choose RAG.
  3. Do users need sources, or do access rights differ between users? Choose RAG.
  4. Is the problem about format, tone or a narrow task, with the knowledge already in the prompt? Try better prompting and examples first, then consider fine-tuning.
  5. Do you have at least several hundred high-quality examples and an evaluation set? If not, you are not ready to fine-tune.
  6. Is RAG in place and measured, with a remaining gap on behaviour? This is the case for combining both.

What makes a RAG project succeed

RAG is simple to demonstrate and harder to industrialise. Most disappointing assistants fail for the same reasons:

  • Retrieval quality. If the right passage is not retrieved, no model can answer correctly. Chunking strategy, hybrid search and re-ranking matter more than the choice of LLM.
  • Document hygiene. Duplicates and outdated versions produce contradictory answers. Decide which sources are authoritative.
  • Evaluation. Build a test set of real questions with expected answers, and score every change. See how we applied this in our RAG-based internal assistant case study.
  • Honest fallback. The assistant must be able to say “I could not find this in the documentation”.
  • Production engineering. Access control, logging, monitoring and cost limits are part of the product, not a second phase.

Cost and timeline, realistically

A RAG proof of concept on a defined document set typically takes four to eight weeks. Reaching production usually takes three to six months in total, most of it spent on data quality, evaluation, security and integration rather than on the model.

Fine-tuning adds a recurring cost that is easy to underestimate: each change to the knowledge, the task or the base model means preparing data and training again. Plan for it as a continuous activity, not a one-off.

Our recommendation

Start with RAG, measure it on real questions, and let the evaluation tell you whether fine-tuning is needed. This order gives you a useful system sooner, keeps your data under control and avoids training a model to solve a problem that better retrieval would have fixed.

Harmonize IT designs and builds these systems as part of our Generative AI & LLM Engineering service, from the first proof of concept to production. If you are weighing the two approaches for a specific use case, tell us about it and we will give you a direct opinion.

Frequently asked questions

Is RAG cheaper than fine-tuning?

Usually, yes, at the start. RAG needs engineering work on ingestion and search but no model training. Fine-tuning adds data preparation, training runs and re-training each time the knowledge or the base model changes. At very high volumes, a small fine-tuned model can become cheaper per request.

Does fine-tuning stop a model from hallucinating?

No. A fine-tuned model still generates plausible text and can still be wrong. Grounding answers in retrieved documents and asking the model to cite them is a more effective way to reduce hallucinations on factual questions.

Can RAG and fine-tuning be combined?

Yes. A common pattern is RAG for knowledge plus a lightly fine-tuned model for tone, format or a specialised task. Start with RAG, measure, and add fine-tuning only if the evaluation shows a gap that prompting cannot close.

How long does it take to put RAG in production?

As a guide, four to eight weeks for a proof of concept on a defined document set, and three to six months in total to reach production with evaluation, access control, monitoring and integration into existing tools.

Do we need a vector database for RAG?

You need a search index, not necessarily a new product. PostgreSQL with pgvector, Elasticsearch or OpenSearch are often enough and may already be part of your stack. Hybrid search, combining keywords and embeddings, generally gives better results than vectors alone.

Keep reading

Let’s make your technology work in harmony

Tell us about your project, your contract need or the team you want to extend. We reply within two working days.